Two stacked containers, two to four simultaneous weighing stations, 1,000 bags per hour. Delivered assembled, set down in a day, moved by forklift.
The most expensive constraint of a conventional bagging installation is not the machine: it is the civil works. Concrete foundations, structural steel, stairways, electrical infrastructure, months of construction and a permanent commitment of floor space.
The KSM-GN50 removes that constraint. The whole process is integrated into two stacked containers on wheels. You set it down on a level slab, connect power and product feed, and you produce the same day.
The upper container houses the bulk receiving hopper and the two (or four) net weighers with their fluidisation. The lower container holds the filling spouts, the FISCHBEIN sewing machine and the discharge conveyor. Operators work under cover, protected from sun, rain and dust.
It was designed for three specific situations we meet regularly among our Moroccan and African customers:
It is also the fastest answer to an urgent requirement: where a fixed installation takes 6 to 9 months from study to start-up, the mobile station is operational in a few weeks.
On a single-station bagger, output is limited by the operator's bag handling time, not by dosing speed. Multiplying weighing stations is therefore the most effective way to raise throughput.
In the 2-station configuration the KSM-GN50 reaches 1,000 bags per hour. While one operator hooks an empty bag on station A, station B is already weighing. In the 4-station configuration output doubles again.
Each station has its own net weigher, BREHM Z6 load cell and BAYKON BX30 Fill indicator: one station down for maintenance does not stop the plant.
The station is built in AISI 304 stainless steel on all product-contact parts, making it suitable for corrosive fertilisers (urea, ammonium nitrate, sulphates) as well as food products. The container structure is anti-corrosion treated and painted.
Transport uses a standard container trailer. Unloading and positioning are done by forklift or crane. No foundation is required — a level concrete slab is enough.
2-station configuration. 4-station version available on request.
Typical applications for the mobile station.
Bagging NPK, urea and ammonium nitrate close to production areas.
Packing directly at the quay after vessel or rail discharge.
Bagging on demand from bulk stock without committing floor space.
Packing sands, graded gravels and minerals into 50 kg bags.
Bagging compound feed in 40 to 50 kg at farms or cooperatives.
The preferred solution for remote sites with no heavy infrastructure.
A level concrete slab able to carry the load is enough. We provide the load plan and footprint with the offer so you can check your existing slab.
One day to disconnect and load, transport time, then half a day to set down and reconnect. The station can produce the day after arrival.
Yes, that is its main use. All product-contact parts are AISI 304 stainless. For particularly aggressive products we offer a 316L version.
Yes, from a generator set. We state the required power in the technical offer according to the number of stations.
A version with a big-bag filling station and lifting frame is available as an option, in addition to or replacing one of the bag stations.
12 to 14 weeks of workshop manufacture in Casablanca including testing, then shipment.
Send us your product, throughput and bag format: we reply within 48 h with a technical proposal and a price.
Belt metering for wet, sticky or non-homogeneous products, up to 40 t/h.
NPK fertiliser blending by gravimetric dosing, stored recipes and batch traceability.
Complete line: screening, weighing and 25 kg bagging at 500 bags/h, AISI 304, Siemens PLC.